Would you like to purchase AMSOIL Products? Please visit

the AMSOIL On-Line Store   << By Clicking This Link.

If You Would Like to become a "Preferred Customer" and Purchase AMSOIL

Products at Factory Direct at Wholesale Prices- Save Approximately 25-30% That

is the Same Price a Dealer Pays Just Click this Link to save Big!!

 Click here for Our Factory Direct Catalog Request Form. Catalog Mailed Directly To You From AMSOIL!

Which 30 Weight Oil Do I Use, 0W-30, 5W-30 or 10W-30?

We get asked this question so often that we have included this special page dedicated exclusively to answering the question.

AMSOIL 0W-30, 5W-30 and 10W-30 synthetic motor oils are ALL 30 weight oils. The answer is that ANY one can be used regardless if your vehicle owners manual says to use, for example, a 5W-30. "W" means winter. In winter weather the 0W oil will flow like a 0W oil, and the 5W will flow like a 5W oil and a 10W will flow like a 10W oil just until the engine warms up. In order to understand the differences one has to first understand that the numerical values given to these various weight oils are strictly empirical numbers. For example, 0W does not mean that the oil has no weight. That is one of the reasons why we say it is strictly an empirical number.

In order to determine the differences between the three oils one has to look at the kinematic viscosity of each lubricant. The kinematic viscosity is essentially the amount of time, in centistokes, that it takes for a specified volume of the lubricant to flow through a fixed diameter orifice at a given temperature.

Let's compare the kinematic viscosity of the three AMSOIL lubricants:

AMSOIL 0W-30 is 57.3 cST @ 40 deg. C, & 11.3 cST @ 100 deg. C

AMSOIL 5W-30 is 59.5 cST @ 40 deg. C, & 11.7 cST @ 100 deg. C

AMSOIL 10W-30 is 66.1 cST @ 40 deg. C, & 11.7 cST @ 100 deg. C.

As you can see from the data above the kinematic viscosities are extremely close. Therefore, whether you use the 0W-30, 5W-30 or the 10W-30 is strictly a matter of choice. With the small differences in kinematic viscosity you would be hard-pressed to detect these differences on initial engine start-up without specialized engine test equipment.

All three oils are excellent motor oils and ANY one can be used in a vehicle which requires either a 0W-30, 5W-30 or 10W-30 oil as well as in several other engine applications including an engine which recommends a 5W- 20 oil.

AMSOIL Signature Series 0W-30 synthetic motor oil is one of the best synthetic lubricants AMSOIL manufacturers for gasoline engine passenger vehicles and light trucks. The molecular and chemical technology used to develop this oil was derived from AMSOIL's Racing Oil. It is a 35,000 mile/1-year motor oil. This is the same oil used by numerous police vehicles and severe duty fleets nationwide. In fact, many national racing teams use the 0W-30 ( as well as AMSOIL Series 2000 20W-50 Racing Oil). The extra horsepower and friction reduction from the 0W-30 often assists a race driver in attaining superior performance. In fact, we know which race teams use it, but cannot disclose that information.

This leads to the next topic: many people also ask us if the 0W-30 is too thin a viscosity oil for high ambient temperature operation. The answer is absolutely not! Thicker viscosity oils are not always necessarily better since in addition to its' various engine lubrication functions, an oil must also effectively transfer heat. Only about 60% of an engines cooling is performed by the engine coolant, and only on the upper half of the engine. The remaining 40% of an engines cooling is performed mainly by the engine oil.

Although a vehicle that is recommended to use a 30 weight oil can also use a 40 weight oil, it is usually not needed. You will gain absolutely no benefit from using a thicker viscosity oil if it is not needed. The only time we recommend a 40 weight oil, such as AMSOIL's 10W-40, to a customer in a passenger car or light truck application is if the vehicle's engine is excessively worn and consumes oil at a higher than normal rate or if the vehicle is being used for very severe duty, high load, high temperature applications.

We hope this brief discussion has answered your questions. If we have not sufficiently answered your questions or if you would like an additional explanation or recommendation for your specific application please email us using the link at the bottom of this page.

AMSOIL has you covered with an extensive product line!   

All AMSOIL Products are made in the U.S.A. keeping America Strong! 

Would you like to purchase AMSOIL Products? Please visit

the AMSOIL On-Line Store   << By Clicking This Link.

If You Would Like to become a "Preferred Customer" and Purchase AMSOIL

Products at Factory Direct at Wholesale Prices- Save Approximately 25-30% That

is the Same Price a Dealer Pays Just Click this Link to save Big!!

Or if you would like to look into becoming a dealer of AMSOIL products......     
Please, email us at bob@wolverine-synthetics.com and we will send you an exclusive comprehensive package of product, technical and business information. If you are serious about AMSOIL products and the business opportunity this is the best option. You will receive extensive technical and business support from both myself and my Direct Jobber, a Detroit, Michigan Truck/Automotive Engineer and Lubrication Specialist with over 22 years experience. We look forward to helping you learn about AMSOIL.

Our Home | Please Contact Us | AMSOIL On-Line Store | Our Privacy Policy